It is no longer news that azsky dongle is back and blazing like never before.If you need an Azsky account or want to renew yours, hit my inbox or contact me on whatsapp 07066330624.


Before you do, download all the necessary tools before you contact me and make sure you have access to desktop computer running on windows XP.
download All tools here and scattered files for your dongles respectively; (G1) (Latest recharge tool) (G1+) (G1 super) (Flashtool)


In this article, i shall be given you steps on how you can successfully renew your expired azsky dongle.. What the above simply means is that, now you can load an azsky 16 digit recharge codes into your G1, G1 Super, G6, xman, G2, G1+ and G3 using Azsky flashtool and only recharge tool v3.06. Similarly, you can use the same recharge voucher for either, g1, or g1+. Before, G1+ account file start with Q*****, now it is a 16 digits recharge code. It doesn’t matter if you use a g6 or azsky xman or g1 super., you only need to use the appropriate software in flashtool, then use the account code via azsky recharge tool.


  • This tutorials is only for original azsky dongles or receivers like azsky xman, azsky G1(with 5v ac adapter), azsky G1+(with 5v ac adapter), azsky G2, Azsky G1 Super, Azsky G6 and Azsky G3. Please don’t use this tutorial for A+ and don’t use it for Azsky 12v ac adapter. If you use this for any other dongle apart from original azsky dongles, you will permanently damage that dongle. If your azsky dongle only display blinking or locked lights only when you insert a sim card, then you are using a fake azsky dongle.
  • You must be connected to the internet to use the recharge tool and your internet must be stable. Please test your internet connection by first opening one or two webpages on your browser. Please don’t use cheats, don’t use a vpn software use normal mobile bundle, recharge tool consumes less than 300kb or data. use only 3g network within your modem and make sure you force yur modem to use only 3g. If you don’t have a 3g in your area, you can also use etisalat or glo. I strongly advice you use 3g network or else, you may continue experiencing random m3 errors and recharge failed. Also make sure that no other app is sharing your internet data plan with you on your computer as at the time you are using azsky recharge tool. I also advice you do this in a business center as against a cyber cafe (If you don’t have a desktop computer or you don’t have an old laptop with 9pin serial port)and use your own internet connection as against that of the business center. I personally loaded 8 accounts yesterday withing one hour without any single error and that was where i made the following pictures. You can detect if your huawei modem is having good internet connection if the light is locked on blue or green light. you can also determine if your zte modem is having good connection if the light is blinking green or blue. your modem must be sending and receiving data.
  • Please if your azsky account has not yet expired, don’t flash your box with flashtool let alone load a recharge code
  • You must olso use a very good and original rs232 cable. Mind you, it is possible for you to use a faulty cable to flash your dongle via flashtool, and the same cable will fail to work with azsky recharge tool.
  • If your azsky box has expired, your box will not work until you renew your account
  • The format of the account is “A93A88CF8E2421AC”
  • It is strongly advisable that you use a desktop computer for the upgrade or at worse, an old laptop with 9 pin serial port. if you use a standard laport via usb to serial cable, it means you are a geek in the business just like me. So this guide is not for you..
  • If you must use a laptop, have it in mind that you can only use usb to serial caple with a computer running windows XP or windows vista. This cable doesn’t work with windows 7 and windows 8.
  • As a matter of necessity, you must download all the mandatory software from the links below.


You must install it on your computer if you don’t have one.

Download Latest Java runtime.

Download all the complete softwares here… (G1) (Latest recharge tool) (G1+) (G1 super) (Flashtool)

(Note: if you are using the very older version of azsky G2, then you will use G1 software to flash your G2)

If you are using azsky G1+, azsky G6 or the latest version of Azsky G2, please download this: (G1) (Latest recharge tool) (G1+) (G1 super) (Flashtool)

Then If you are using G1 Super download this software: (G1 super)

How to Flash your dongle with flash tool using the appropriate software to GPRS Dongle:

Note: before you can successfully recharge your dongle with azsky recharge tool, you must first successfully use azsky flashtool to flash your dongle.

1. Use the Original RS232 cable to connect your azsky GPRS dongle to your PC.
2. Run the “Flash_tool.exe” at first,the On screen display(OSD) will be as below


3.In the “Option” Menu,set the Baudtate to “115200”,set the COM port to your RS-232 cable port in the PC ,for example,if the RS-232 cable port is com4.,please set the COM port to com4. But if you use a desktop computer, it will definitely be COM 1


4.Press “Scatter/Config file” to choose the “50D_MOD_11B_BB.cfg” in the upgrade software folder.the OSD as below:(Note: your .cfg file will be downloaded from the links below)

5.The main windows will display the ARM_BL,ARM_EXT_BL,PRIMARY_MAUI, VIVA, information.
6.Before you upgrade the new software to azsky dongle,you must make sure “Format FAT” is disabled. To do this, Press “Option”→ “Format FAT” and set it to “do not format fat”.


7.Press “Download”,then power on the GPRS dongle,it will begin to upgrade the new software.


When the firmware upgrade is completed successfully, it will display “Last action was done”.
8. Now you can use Recharge Tool to finish recharge for the dongle.
If your flashing is successful, you will get a message as shown below:



Note: Before you use azsky recharge tool to set account, please make sure you do the followings: First, disconnect your dongle from your pc after flashing with azsky flashtool then reconnect it when you want to use it with recharge tool, You should also endeavor to use a desktop computer, connected to a direct internet not via proxy, you should disable your antivurus prior to the process, you should use windows xp on a clean pc that hasn’t run previous version of azsky recharge too.(If you overwrite the older version of azsky recharge tool with the latest version, you Secondly, please before you run recharge tool,confirm sim card is inserted into your dongle. Wait a moment like about 15-20s after powering your dongle,then use recharge tool to upload code.
1: Installing the tool:
If you want to recharge your dongle please install dongle recharge tool first.The installation is very simple, you double click the software install package then follow the install guide. The recharge tool is 32mb in size and it is compatible with all azsky dongles and receivers
2: How to Configure the recharge tool
If your box is Azsky G1 Supper, G6, G1, Xman, or G1+, please click Box Type menu on the window and then click M3. If your box is G3, then please click G3.After you configure the box type. On the window it will display your selection , for example : BoxType: M3.
After you config the box type, you should select the com port that connected to the dongle.For example , I connected the dongle to my pc on the com3, it depend on your pc(Note: if your pc has no serial port , you can’t select the com port on the window)
3: Start recharging
After you config the recharge tool , you can input the Recharge Code or copy and paste it into recharge tool and click Upgrade button to start recharging.If there is no error , the tool will tell you recharge success.
Note: before you click Upgrade , please make sure that dongle is already connected to your pc by original rs232 serial cable.. If your recharge failed , please contact me by posting your error message in the comment box below.

(Important notice: Once you click on upgrade on your recharge tool v3.06, your 3g modem to must be sending and receiving data as will be shown on the LED of your modem. Similarly, you will see the following messages briefly on recharge tool window m3 random ok>>getting username and password sucess>>recharge success!>> write server success! as shown in my picture below. In my own case, i was using an airtel modem at full 3g network blask, i recharge a dongle successfully withing 1 minute, I could only see getting username success because everything happens so fast. If you are stuck or m3 random ok then your internet is either unstable, not active, or just too slow. I total advice against using edge especially if you want to get it done fast).


(Visited 125 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

Comments Protected by WP-SpamShield Anti-Spam